sharpy moving head light

Description:

1.sharpy beam 200 2.MSD Platinum 5R 3.specilize in stage lightingfor 13 years 4.control channel: max 20 DMX 512

sharpy moving head light

 

Para: 

POWER SUPPLY

•  90 /240V  50/60 Hz

INPUT POWER

•  350VA at 230V 50Hz

LAMP SOURCE

•  Discharge lamp with a short arc burner in a reflectorsystem
•  - Type: MSD Platinum 5R
•  - Output Lamp power: 189W
•  - Colour temperature: 8, 000 K
•  - Luminous flux: 7, 950 lm
•  - Average life: 2, 000 h

OPTICS

•  3-lens HQ optical group (patent pending)
•  Zoom: from zero to 3.8°
•  Focus: electronic
•  Light output at 20 meters (65 feet): 59, 760 lux

COLOR SYSTEM

•  Interchangeable color wheel with 14 colors open

EFFECTS SECTION

•  Interchangeable gobo wheel with 17 fixed gobos open
•  High speed shake effect
•  8-facet rotating prism
•  Frost filter
•  Mechanical shutter and adjustable speed strobe effect
•  Mechanical dimmer

ConTROL AND PROGRAMMING

•  Max 20 DMX 512 control channels
•  DMX protocol signal: USITT DMX 512
•  Display: Graphic LCD backlit b/w Display
•  Pan/Tilt Resolution: 16 bit
•  Movement control: vectorial
•  DMX signal connection: 3 and 5 pole XLR input and output
•  Software upload through DMX input

BODY

•  Aluminium structure with die-cast plastic cover.
•  Two side handles for transportation.
•  Device locking PAN and TILT mechanisms for transportation andmaintenance.

MOVING BODY

•  Travel:
•  - PAN = 540° - TILT = 250°
•  Maximum speeds:
•  - PAN = 2.45 sec 
•  - TILT = 1.30 sec
•  Resolution:
•  - PAN = 2.11° - PAN FINE = 0.008°
•  - TILT = 0.98° - TILT FINE = 0.004°
•  Automatic repositioning of PAN and TILT after accidentalmovement not controlled by control unit.

ELECTRONICS

•  Long life self-charging buffer battery
•  Pre-set macros
•  Function reset from the lighting desk
•  ON/OFF lamp control from the lighting desk
•  "AUTOTEST" function from menu
•  ETHERNET ready
•  Electronic monitoring with status error
•  Cooling system monitoring
•  DMX level monitoring on all channels
•  Internal data transmission diagnostics
•  Firmware upgrade with no power
•  Firmware upload from another fixture

SAFETY DEVICES

•  Bipolar circuit breaker with thermal protection.
•  Automatic break in power supply in case of overheating orfailed operation of cooling system.
•  Forced ventilation with axial fans.

WORKING POSITION

•  Any Working Position
•  Hanging system: with fast-lock omega clamps (1/4 turn) on thebase

 Pics:

sharpy moving head light